Motor and Encoder

N5065_enc_front@0,5x.jpg
N5065_enc_back@0,5x.jpg
N5065_enc_side@0,5x.jpg
N5065_enc_lineup@0,5x.jpg
N5065_enc_CAD2.jpg
N5065_enc_CAD.jpg
cut_backshaft@0,5x.jpg
N5065_enc_front@0,5x.jpg
N5065_enc_back@0,5x.jpg
N5065_enc_side@0,5x.jpg
N5065_enc_lineup@0,5x.jpg
N5065_enc_CAD2.jpg
N5065_enc_CAD.jpg
cut_backshaft@0,5x.jpg

Motor and Encoder

from 79.00
Encoder:
Quantity:
Add To Cart

The motor is a N5065 270kv, rated 1600W. For complete specs, please find it in the Motor Guide.

There are two options for the encoder:

  1. A 2400 CPR optical quadrature incremental optical encoder with no index pulse. This has a max speed of 5000 RPM and comes with a flexible coupler for mounting to the motor.
  2. The CUI AMT102 capacitive encoder with 8196 CPR resolution, index pulse and a max speed of 7500 RPM. This comes with matching crimp housing and crimp pins (you will need your own crimping tools). Alternatively, standard 0.1" female jumper wires will also fit.

This listing includes everything seen in the 4th photo, which is:

  • N5065 270kv - 1.6kW motor
  • Aluminium cross mounting bracket, with screws
  • Rear shaft adapter, with screws
  • M8 propeller hub nut with washer
  • 3x 4mm female bullet connectors (matches motor)

With the 1st encoder option you also get:

  • 2400 CPR optical Encoder (5000 RPM max)
  • 8mm to 6mm flexible shaft coupling (with 
  • 5 pin 0.1" male header for encoder (not soldered)

With the 2nd encoder option you also get:

  • CUI AMT102 encoder.
  • Molex 50-57-9405 crimp housing.
  • Matching female crimp pins.

All dimensions can be found in the CAD model. The motor mounting thread is M4, and the encoder mounting thread is M3. The CUI option will have a CAD model and pictures available soon.

To make the motor and encoder fit together as shown with the 1st encoder option, it is necessary to cut the rear shaft adaptor, as shown in the last photo. It is made of fairly soft aluminium and is easy to cut with a hacksaw.